Zero Halliburton cases feature several styles of TSA Approved Combination locks on luggage, wheeled business, and attaché cases. The locks featured on the Zero Halliburton aluminum attachés are not TSA compliant unless otherwise noted.
For instructions on resetting older product locks, don't hesitate to get in touch with Zero Halliburton Customer Service at [email protected].
Below are instructions on changing the factory pre-set combinations to your unique 3-digit code.
TSA Inset Lock Featured on ZRL Polycarbonate and Profile Wheeled Styles
The factory pre-set combination is 0-0-0. Make sure the combination reflects 0-0-0 before attempting to reset.
To set the lock to your desired 3-digit code, the steps to follow are below. (Refer to Images)
Insert a narrow, pointed object, such as the tip of a pen, into the small round reset button on the right side of the lock until it makes a clicking sound. The reset button will remain in the depressed position. (If the reset button does not depress, make sure the combination is at 0-0-0; using excessive force to depress the reset may damage the lock.)
With the reset button in the depressed position, set the combination to your 3-digit code.
(It is recommended that you write down and save your combination. If the case is locked and the combination is forgotten, a locksmith will be required to open the case.)
Once set, push the Slide-Open button to the right. (Make sure your combination remains in place). You will hear a clicking sound when the reset button returns to its original position. Your combination is now set.